I managed to locate some extra pockets of time (from somewhere) over the last couple of weeks to continue making progress with my SWEP1 service. In this update, I wanted to focus on the apron and lower playfield areas. That way I wouldn’t need the game to be offline for long periods, allowing me to continue playing. First up will be the apron area. SWEP1 has an awesome transparent blue apron. The decals are in excellent condition except for one small spot on the shooter power gauge.
williams
All posts tagged williams
I’m a fan of the Pinball 2000 (P2K) games released by Williams and I’m excited to now be working on one – especially since it’s my own. I have a little bit of down time while waiting for the Harley CPU board, so decided to keep my hands dirty and continue tinkering. The next machine to get a rebuild is a Star Wars Episode One. It was released mid 1999 and is the very last game to be made by Williams before they sadly closed. Interestingly, you can (or at least could) buy conversion kits for this and Revenge from Mars – meaning you could run both games in the same cabinet by swapping playfields, ROM’s and shooter assembly. It’s a bit of a manual process to swap them, but still nice to have two games taking up the one spot. There were sadly only two P2K machines made (with a couple more planned – Wizard Blocks and Playboy) and it’s a shame they were not able to continue with them. I feel they are very underrated! There isn’t much wrong with the game that needs to be sorted out. It mostly just needs the assemblies serviced and some cosmetic improvements. I’ll be doing my usual rebuild of all assemblies and cleaning, along with some presentation fixes too. Time to get started!
Just before I was finishing up the previous Bride of Pinbot post, an important parcel arrived from the USA. It contained the BoP ramp entry protector set from Cliffy! Due to the issues with the heart beat ramp, I was in some ways forced to replace the ramp (or leave the various hacks that had been put in place for it). I had no intention of putting the new ramp in until the protectors arrived – so I was glad to see these.
With four weeks off over the Christmas break, it is the perfect opportunity to continue with the overhaul of my Bride of Pinbot 2.0. The plan was to try and do the next few phases of the overhaul in smaller chunks, avoiding the downside of having the game off line for long periods. But this update turned out to be much bigger than expected and has been split into two updates. This happened mainly because getting the top layers off the playfield was a pain and having to put them back on only to remove a few days later for the next phase would create a whole heap of extra work. So once I realised I was in up to my elbows, I decided to keep going. Starting off small though, the first assembly on my hit list for this update is the shooter rod.
I had the goal of finishing off Funhouse in time for Christmas. I didn’t quite make it. I’ve been keeping myself busy on the repair & service over the last week and am on the final stretch. First thing to look at for this update is the coin door. It’s been on my to do list for awhile now and no more putting it off. The red and orange have long since faded from the artwork and the coin entry housing is a bit scratched up. There is also a section of the decal ripped at the lower left corner of the front panel. When dropping the machine off, the owner asked me to touch this up and possibly paint the red flags and balloons to give it a bit more colour. It’s also missing the coin return housing, which I will need to source.
