Not long after finishing up on my X-Files machine, I was contacted by a guy who needed some help with an EM machine he owns. After reading the various posts I made on Space Orbit (Gottlieb) and Mariner (Bally), he was hopeful I might be able to assist with fixing his Playball machine. EM’s are really interesting to work on (plus a challenge), so was happy to offer my help. No promises were made, but I’d do what I could. Playball is a baseball themed pin released by Gottlieb in 1971. It has two sets of score reels, one to track the score and the other to track the home run count. It lacks a plunger to launch the ball, instead the ball is launched from between the flippers using the right flipper button to trigger a slingshot style arm. This actually gives the playfield area a little more space and room for features. Another really cool feature is the game has a ball save – if you fail to hit a 10 or 100 point target, the ball can be played again. I didn’t realise this kind of feature was present in EM’s – neat! I like the playfield on this game and I think it would be a fun title to play. That’s enough incentive to get cracking on it and get it working again so I can get a few games on it before it goes back to the owner.
Pinball
Documenting my adventures into pinball repair and restoration
Time to wrap up the servicing on my X-Files machine – I’ve missed not being able to play it. At the end of the last update, I was working my way through getting everything back onto the playfield. I had already made good progress getting the lower playfield area done and was chipping away at the upper sections. All the posts had been installed, so the next bits to go back onto the machine were the plastics. All plastics were cleaned (both sides) and polished before being installed again. The right side of the playfield came together first.
Time for an update on the service and repair on my X-Files pinball machine. After the work done so far, the game has been holding up well. I have really come to appreciate it and going by the audit menu, I’ve put just over 150 games into it. It’s a fun title and I think does not get the credit it deserves. While it’s playing well, it can be even better. To get the machine into the state I want it, I need to give the playfield (and all its surface components) a really good clean. I also want to rebuild the pop bumpers and add LED’s for the GI. That means it’s time to take the machine offline for the next week (maybe two) and give the playfield and it’s parts a solid clean.
First to come off the machine were the ramps. This then allowed me access to the plastics below. With the plastics off I could then access all the various posts and ball guides. There are quite a few to remove. The plastics all need a good clean and these will get the novus treatment before being installed again. Often, dust and crap attaches to the underside of the plastic too, which can affect how well they look lit up. So both sides of each piece will require a clean. I also removed the sling shot parts and return lanes.
After my last two updates, X-Files is already starting to play better and I’m happy with how the machine has progressed so far. While waiting for a couple of parts to arrive, I decided to get a few smaller things done around the machine. The filing cabinet has two globes pointed directly at it, with lamp shades attached to the socket. These act as spot lights during play and light the cabinet up. The one on the left was missing the lamp shade (also called a reflector).
It’s time for the second update on my repair and servicing of a SEGA X-Files pinball machine. Less repairs for this installment and mainly servicing what’s there. My focus for this update is to work through the remaining under playfield assemblies that need a service. X-Files is a bit thin on coil assemblies compared with other machines I’ve worked on recently. Outside of the flippers and slingshots, there are only 6 others to service (and three of those are pop bumpers). Once they’ve all been cleaned up, that will mean I’m ready to strip and clean the playfield. I’ll be starting with the slingshots. The assemblies are just like the ones I saw on my Date East Last Action Hero. They get a good work out during play, so have built up a nice layer of black dust around the plunger, link and coil sleeve.
