After my last two updates, X-Files is already starting to play better and I’m happy with how the machine has progressed so far. While waiting for a couple of parts to arrive, I decided to get a few smaller things done around the machine. The filing cabinet has two globes pointed directly at it, with lamp shades attached to the socket. These act as spot lights during play and light the cabinet up. The one on the left was missing the lamp shade (also called a reflector).
SEGA
All posts tagged SEGA
It’s time for the second update on my repair and servicing of a SEGA X-Files pinball machine. Less repairs for this installment and mainly servicing what’s there. My focus for this update is to work through the remaining under playfield assemblies that need a service. X-Files is a bit thin on coil assemblies compared with other machines I’ve worked on recently. Outside of the flippers and slingshots, there are only 6 others to service (and three of those are pop bumpers). Once they’ve all been cleaned up, that will mean I’m ready to strip and clean the playfield. I’ll be starting with the slingshots. The assemblies are just like the ones I saw on my Date East Last Action Hero. They get a good work out during play, so have built up a nice layer of black dust around the plunger, link and coil sleeve.
Recently, a new machine entered my line up – X-Files. Release by SEGA in 1997 with 1500 made, it’s the most modern machine to enter my pinball fleet. As you know by now, I’m not one to just get a machine in and play it. There’s always work to be done cleaning, fixing and tuning my machines. This one is no different and I’ll be working my way through the machine in typical fashion for a full service.
After finishing up my first Arcade cabinet recently, I decided I was not even going to bother starting a new project until I could acquire a Wonderboy PCB. An official SEGA one at that. The next cab I build will be to play this. I decided to put some feelers out there for one. They don’t appear to be all that common, and are currently going for around $230AU when they do.
Luck (or maybe fate) intervened, and with the help of a fellow member on the Aussie Arcade forums, I now have in my possession, an official SEGA Wonderboy board from 1985.
Because it’s pre JAMMA, it comes with an adapter. As with my last cabinet, it will utilise a JAMMA harness as I would also like to put in a 19 in 1 horizontal games board at some point.
So, the second cabinet is now under way. Slowly. Lack of funds is going to make progress on this cabinet slower than the last, but I still have some planning to do on the exact shape. I’m thinking of using the same Midway shape as my Galaga cab, but using different artwork. Perhaps Galaxian, or maybe even Pac Man. Time will tell.