posts

All posts tagged posts

Progress on Dr Who has continued quite well over the last couple of weeks and I’m now down to the final section of playfield. This update will be focusing on the remaining assemblies at the top of the playfield – the pop bumpers and the mini playfield. My plan is to strip and clean the top playfield area (including the pop bumpers) and then move onto the mini playfield. The area is quite filthy, but nothing a good clean won’t sort out. Time to get started.

Dr Who Pinball Repair
Continue Reading

With four weeks off over the Christmas break, it is the perfect opportunity to continue with the overhaul of my Bride of Pinbot 2.0. The plan was to try and do the next few phases of the overhaul in smaller chunks, avoiding the downside of having the game off line for long periods. But this update turned out to be much bigger than expected and has been split into two updates. This happened mainly because getting the top layers off the playfield was a pain and having to put them back on only to remove a few days later for the next phase would create a whole heap of extra work. So once I realised I was in up to my elbows, I decided to keep going. Starting off small though, the first assembly on my hit list for this update is the shooter rod.

Bride of Pinbot Restoration
Continue Reading

Welcome to the fourth installment on the repair and service of a Williams Funhouse. With the lower and middle playfield sections completed in previous updates, this one will be focusing heavily on the upper playfield area. I want to get a few cabinet touch ups done too as they have been on my to do list for awhile. So far the machine has been coming long great and I’m looking forward to getting it all back together for some testing. The upper playfield area is quite dirty, but everything is there so a good clean should bring it up nicely.

Funhouse Pinball Repair
Continue Reading

I can always tell the level of enjoyment I get working on a machine by how much it consumes my free time. Funhouse has been consuming a lot of my free time over the last few weeks which means progress has been good. So I’m back again with the third update. In this update, I’ll be focusing on the playfield area (and assemblies) in the middle stretch of the playfield. This includes the right scoop, pop bumpers and left upper flipper. There are various plastics and metal posts that will need to be removed and cleaned. There is also a ramp that runs below the playfield connecting other assemblies to the scoop which I’ll remove and clean too.

Funhouse Pinball
Continue Reading

Now I feel like i’m getting back into the swing of pin updates 🙂 Progress on the Funhouse has been moving along smoothly this week, so I am keen to get another post up. For this update, I wanted to focus on the lower playfield area. In general, everything just needs a really good clean, although the sling shot plastics will be replaced. Some of the screws used on the clear posts are not correct and these will be replaced too. All up though, it’s a solid base to start with.

Funhouse Pinball
Continue Reading