Back for the second episode in the series covering my work on two Sopranos pinball machines. To kick off this episode, I wanted to sort out a missing piece from the keeper machine. On the right side of the playfield there should be a spot light attached just above the two targets. This was completely missing and so will need to be replaced.
plastics
All posts tagged plastics
After finishing work on Baywatch recently and sending the machine on its way back home to the owner, it was time to advance to the next game in the queue. Only this time it’s not one, but two machines, making this a double repair & service log for The Sopranos. I have to admit – I’ve never watched the show and haven’t really been interested in it. But the game looks like it’s got some fun shots and lots of things to do during play. The owner of these machines will be keeping one (the machine on the right) and the other will be sold once my work on it is complete. Working on two of the same game at the same time makes sense as it saves the owner money in parts postage and also some time as I can do the same task on both machines together. Similar to my other threads, this isn’t a restore, but the game will be pulled apart, cleaned, serviced and rebuilt. Broken and worn parts will be replaced. Missing parts will be sourced where possible and anything interesting will be pointed out. The games arrived to me mostly working, with only a few minor faults to address before I get stuck in to them. They are in reasonably good condition (mainly dirty) – so should come up looking great for the owner once done.
Getting everything back onto the playfield is one of my favorite parts of the pinball service as you see all the cleaning effort really come together. In this update, I want to get all the playfield parts cleaned up and installed back onto the machine so I can begin testing it. First up, several rails had been set aside for cleaning.
It’s update time again! Returning with part six of the repair and service I’m performing on a Williams Whirlwind machine. The updates have been fairly regular, which is great as it means progress has been pretty smooth. I’ve had a few hold ups while waiting for parts, but that’s about all. In my last update I finished off servicing the remaining assemblies on the machine. In this update, I’ll focus on getting the remaining bits back onto the playfield to get the game into a playable state! I’m really looking forward to seeing how it performs once the final pieces are cleaned and the playfield is back together. I suspect I will make a few minor switch tweaks around the sling shots and pop bumpers to get them in a sweet spot sensitivity wise – time will tell. To begin this update though, the replacement plastic pieces I ordered from Pinball Center arrived. They have a clear protective layer on top, which is why they look a little dull.
Having a set of pop bumpers on the playfield is almost mandatory for me when looking at pinball machines to play. The designers of Whirlwind must really have loved pop bumpers. Why have just one set on the playfield when you can have two? The only down side to pop bumpers is disassembling them as it cam be fiddly, especially those lamp sockets. The end result though after working on them really improves their performance, along with the presentation of a machine. It also makes them sound great too. The set I did in my previous update came up really nice and now it’s time to rebuild the second set. This update will be covering the final assemblies in the machine I need to look at, all of which are located at the top of the playfield. I’ll be starting first with the pop bumpers though.
