Baywatch

All posts tagged Baywatch

Time has gotten away from me lately, with my attention being drawn to family, along with a string of projects all wanting my attention at once. I managed to finish off the final few things on Baywatch a few weeks back, so want to close off the work with a short update. In the last update, the playfield had been put back together after a full strip and clean, ready for testing. One issue I noticed when the machine first arrived was the auto launcher. Sometimes it would not shoot the ball all the way into play, and the ball would roll back to the shooter lane (this isn’t to be confused with the ball serve I issue I reported on and fixed in an earlier update). I thought perhaps cleaning the assembly would be enough, but after testing with the playfield rebuilt, I was convinced it was more of a mechanical issue. So I lifted the apron off the playfield to take a look.

Baywatch Pinball
Continue Reading

Getting everything back onto the playfield is one of my favorite parts of the pinball service as you see all the cleaning effort really come together. In this update, I want to get all the playfield parts cleaned up and installed back onto the machine so I can begin testing it. First up, several rails had been set aside for cleaning.

Baywatch Pinball Repair
Continue Reading

It’s time to get into some heavy duty cleaning on Baywatch. The only way to do that, is get everything off the playfield so I have unrestricted access to the lot. People can underestimate how long this process takes, especially on DMD era machines. Pulling a playfield down can be quick, but cleaning everything and getting it all back on (in the correct layout and order) takes up more time than you expect. As always, it’s best to take a lot of photos along the way with this process. I prefer to do the playfield areas in smaller batches, but due to the number of ramps and rails, it isn’t possible here. The lower playfield area and apron have been dealt with in previous updates, so now I have the top two thirds to contend with. Although the machine is dirty, it’s going to clean up nicely.

Baywatch Pinball Repair
Continue Reading

What’s better then two progress updates on a pin repair & service in the same week? Another one to go with them of course 😉 This update rounds up the final assemblies I can get at from under the playfield (besides the pop bumpers), before I move on to stripping the playfield. To kick this update off, I’ll start with the mini shark fin flipper on the right side of the playfield. I see this and think JAWS could be a neat Pinball theme. Some fun trivia – there was an Italian conversion by Europlay of an EM pin called Jaws – with a digital display and sound card added. Linky: http://www.ipdb.org/machine.cgi?id=5080. I’m thinking something more modern would be neat in terms of JAWS. Anyway, let’s service that flipper.

Baywatch Pinball Repair
Continue Reading

As mentioned in my previous update, progress has been moving pretty smoothly so far on the Baywatch overhaul. Part of the reason for this is due to working on a few things at the same time. I had been waiting on a couple of parts to arrive for the flippers in the previous update, so started work on the apron area. That way I kept making progress and it ended up being completed around the same time. It doesn’t always work out that way, but I like to keep things moving forward as much as possible so the owner isn’t without their machine for too long. As a result, you’ll see some photos in this update which contain progress from the flippers and slingshots in the previous update 🙂 Anyway – this update is solely focused on the apron area. This includes the ball trough, ball serve, shooter, up kicker and ball save assemblies. There is one problem I need to look at too, which is the ball not being served to the shooter lane correctly. Often it takes 3+ attempts to get the ball into the shooter lane. The metal apron is in excellent condition, as are the decals. A few small scratches are present on the SEGA logo, but nothing worth worrying about. The old instruction card (in Italian) will be replaced by the time I’m done. Two very minor scratches on the metal (just to the right of the SEGA decal) will be touched up with a very small amount of satin black, so you’ll never see them.

Baywatch Pinball Repair
Continue Reading