One of the final assemblies to look at on my Last Action Hero is the drop target bank. Located on the left side of the playfield, it contains 5 targets, spelling the word crane. It’s use for the skill shot to begin each ball and also to activate the crane during the game. It gets a fair bit of use during play and I have no doubt can do with a clean.
drop targets
All posts tagged drop targets
My work on servicing Counterforce is now coming to an end. It’s great news because now I can actually play and enjoy it! This project has gone quite quickly compared to my others (just over 2 months in length). First task for this update was to clean the legs up a bit. They are old and have some rust, but I’ve certainly seen worse. I have a two options I can consider. First is to clean them up and the second is to clear off the rust as much as possible and spray them. I guess a third option is buy a new set – but these legs are still good and I think a clean will do. New legs on a machine with faded and scratched cabinet art won’t look right anyway. Each leg was placed onto my work horse to have the rust cleaned up. This was done mostly with a wire brush attachment for my drill.
The drop target bank has waited, or more accurately, been put off for, long enough. Time to pull the assembly to pieces and clean it all. When I first got the machine home, the 6th and 7th yellow drop targets were broken. I replaced these back in update #2 so I could start a game and test out the switches. At this point, the drop target bank functions correctly. That includes all switches. So this is a good starting point. If I mess anything up in rebuilding the assembly, I’ll know it’s my fault. The plastic, posts and old rubber had been removed awhile back. This photo is also from awhile ago too as you can see all the areas around the drop targets are incomplete (but have since been finished in previous updates).
It’s time to once again dive into a pile of trash pinball parts and see what sort of gems I can uncover. This lot of pinball spare parts (or crap box as it’s also termed) cost under $16AU. There wasn’t anything in the original photos that caught my eye, I just wanted more spare parts available at hand for my projects. So, let’s have a look.
Something that didn’t quite make it into my update last night was looking at an issue with the drop targets. I rebuilt them recently, but noticed a problem once complete. The targets sit a bit too high when they retract, which causes them to sit over the top of the playfield. This causes the ball to jump when hitting them – especially on the right target. Not good for the life of the drop target, and puts the plastic above it at risk of damage.
