First target on my hit list for this update was the broken opto on the 3 bank drop target PCB. As mentioned in my previous update, the opto component had been ripped off the board. I had originally thought the whole drop target assembly needed to be removed from the machine to work on the PCB, but on closer inspection I found the board is attached to the drop target frame with a set of e-clips. Removing these allows you to slide the board off the back of the assembly – nice! Now that I was aware of this, I decided to push this up my priority list and repair it. A replacement opto was ordered so this issue could (hopefully) be resolved sooner than I expected.
cleaning
All posts tagged cleaning
Playball has come along nicely since it was first dropped off for repair and it’s a satisfying feeling each time a forward step is made. Getting old machines back into a fully working state is what I love most about this hobby. I finished up my last update with an initial look at the three man on base relays. These are the interlock style relays, which have 2 coils to toggle its switches between state. In Playball, these control if a man is on the base or not. The specific problem I’m looking into is why the man on base relays do not reset as part of the game reset sequence. Currently, their state is carried between games.
Time to wrap up the servicing on my X-Files machine – I’ve missed not being able to play it. At the end of the last update, I was working my way through getting everything back onto the playfield. I had already made good progress getting the lower playfield area done and was chipping away at the upper sections. All the posts had been installed, so the next bits to go back onto the machine were the plastics. All plastics were cleaned (both sides) and polished before being installed again. The right side of the playfield came together first.
Time for an update on the service and repair on my X-Files pinball machine. After the work done so far, the game has been holding up well. I have really come to appreciate it and going by the audit menu, I’ve put just over 150 games into it. It’s a fun title and I think does not get the credit it deserves. While it’s playing well, it can be even better. To get the machine into the state I want it, I need to give the playfield (and all its surface components) a really good clean. I also want to rebuild the pop bumpers and add LED’s for the GI. That means it’s time to take the machine offline for the next week (maybe two) and give the playfield and it’s parts a solid clean.
First to come off the machine were the ramps. This then allowed me access to the plastics below. With the plastics off I could then access all the various posts and ball guides. There are quite a few to remove. The plastics all need a good clean and these will get the novus treatment before being installed again. Often, dust and crap attaches to the underside of the plastic too, which can affect how well they look lit up. So both sides of each piece will require a clean. I also removed the sling shot parts and return lanes.
It’s time to look at the last set of assemblies on the playfield that have not yet had my attention – the three pop bumpers. These guys get a decent work out in just about every game played on the machine, so their assemblies are crying out for a clean.
