Getting everything back onto the playfield is one of my favorite parts of the pinball service as you see all the cleaning effort really come together. In this update, I want to get all the playfield parts cleaned up and installed back onto the machine so I can begin testing it. First up, several rails had been set aside for cleaning.
assemblies
All posts tagged assemblies
What’s better then two progress updates on a pin repair & service in the same week? Another one to go with them of course 😉 This update rounds up the final assemblies I can get at from under the playfield (besides the pop bumpers), before I move on to stripping the playfield. To kick this update off, I’ll start with the mini shark fin flipper on the right side of the playfield. I see this and think JAWS could be a neat Pinball theme. Some fun trivia – there was an Italian conversion by Europlay of an EM pin called Jaws – with a digital display and sound card added. Linky: http://www.ipdb.org/machine.cgi?id=5080. I’m thinking something more modern would be neat in terms of JAWS. Anyway, let’s service that flipper.
As mentioned in my previous update, progress has been moving pretty smoothly so far on the Baywatch overhaul. Part of the reason for this is due to working on a few things at the same time. I had been waiting on a couple of parts to arrive for the flippers in the previous update, so started work on the apron area. That way I kept making progress and it ended up being completed around the same time. It doesn’t always work out that way, but I like to keep things moving forward as much as possible so the owner isn’t without their machine for too long. As a result, you’ll see some photos in this update which contain progress from the flippers and slingshots in the previous update 🙂 Anyway – this update is solely focused on the apron area. This includes the ball trough, ball serve, shooter, up kicker and ball save assemblies. There is one problem I need to look at too, which is the ball not being served to the shooter lane correctly. Often it takes 3+ attempts to get the ball into the shooter lane. The metal apron is in excellent condition, as are the decals. A few small scratches are present on the SEGA logo, but nothing worth worrying about. The old instruction card (in Italian) will be replaced by the time I’m done. Two very minor scratches on the metal (just to the right of the SEGA decal) will be touched up with a very small amount of satin black, so you’ll never see them.
Having a set of pop bumpers on the playfield is almost mandatory for me when looking at pinball machines to play. The designers of Whirlwind must really have loved pop bumpers. Why have just one set on the playfield when you can have two? The only down side to pop bumpers is disassembling them as it cam be fiddly, especially those lamp sockets. The end result though after working on them really improves their performance, along with the presentation of a machine. It also makes them sound great too. The set I did in my previous update came up really nice and now it’s time to rebuild the second set. This update will be covering the final assemblies in the machine I need to look at, all of which are located at the top of the playfield. I’ll be starting first with the pop bumpers though.
Progress on the Whirlwind service has been quite good so far and it’s cleaning up nicely. There have been a few small surprises along the way, but nothing scary or too troublesome. On the bright side, the surprises keep things interesting and is a constant reminder that no two machines are the same. There is always something different to solve, making it a rewarding feeling to work on each machine. I’ll continue to work my way up the playfield in this update, performing some general cleaning and servicing more assemblies along the way. The first one to receive attention in this update is the top right flipper.
