Progress on the Whirlwind service has been quite good so far and it’s cleaning up nicely. There have been a few small surprises along the way, but nothing scary or too troublesome. On the bright side, the surprises keep things interesting and is a constant reminder that no two machines are the same. There is always something different to solve, making it a rewarding feeling to work on each machine. I’ll continue to work my way up the playfield in this update, performing some general cleaning and servicing more assemblies along the way. The first one to receive attention in this update is the top right flipper.
service
All posts tagged service
Time for another progress update on the Whirlwind repair & service I’m currently carrying out. This time I’m looking at the apron and all the assemblies contained within. I managed to work through this area pretty quickly, which is why this update is so soon after the last one. I forgot to take a photo of the apron before starting, so the one shown below is from the day the machine was dropped off to me (you’ll notice the old flippers, rubber, etc which were taken care of in the last update). The apron itself is in really good condition. The paint is mostly unscratched and no rust showing or paint flaking. There is an old operator sticker that needs to come off on the left side and some old white sticker on the right which also needs to be removed. It’s a bit dirty, but with a clean, I think it’s going to come up really nice.
First target on my hit list for this update was the broken opto on the 3 bank drop target PCB. As mentioned in my previous update, the opto component had been ripped off the board. I had originally thought the whole drop target assembly needed to be removed from the machine to work on the PCB, but on closer inspection I found the board is attached to the drop target frame with a set of e-clips. Removing these allows you to slide the board off the back of the assembly – nice! Now that I was aware of this, I decided to push this up my priority list and repair it. A replacement opto was ordered so this issue could (hopefully) be resolved sooner than I expected.
A good way to continue working on pinball machines (without going broke buying them), is to work on other peoples machines and bestow to them the same love I give mine (the machines that is, not the owners..). I’m always on the look out for a new Pinball project to work on as I love giving them a new lease on life, but pickings have been slim lately. The universe has other ideas though and through a chance message, I was asked if I could work on some machines that needed a bit of TLC, with Whirlwind being first on the list. How could I refuse? 🙂 This isn’t a restore but also not a simple service either. I’ll be doing my usual rebuilding and cleaning of all assemblies, along with fixing any game play issues and giving the machine a bit of a face lift along the way. I don’t have plans to do any board work and the owner has a few requests on specific things he wants addressed, which i’ll be following. Whirlwind is a great game and I’m very excited to be working on it. Once complete, it’s going to be hard to let the owner take it home.
A small issue began to appear in my X-Files machine recently and I wanted to share its cause since it’s something that can easily be over looked and maybe is not something the occurs often. One of the playfield insert lamps was becoming intermittent. At the base of the playfield, where the ball drains, there are a set of 7 inserts which light up and animate during play. One of these would occasionally not light up as part of the sequence. Then it became more frequent, until eventually it stopped lighting up at all. Given I had changed all the bulbs to LEDs as part of my rebuild not too long ago, I figured it wasn’t as simple as a blown globe and a quick swap over to solve.
