Having already made good progress on my SWEP1, I was keen to keep going and complete the remaining work. It’s no good having a half clean machine, so I made the decision to take SWEP1 offline for a couple of weeks to address the remaining playfield areas and assemblies. The lower playfield area around the apron and sling shots was covered in the last update and now I need to look at the middle and upper sections of the playfield. This means taking both ramps off to get access to everything on the playfield in these areas. The only assemblies I need to look at are the pop bumpers, so most of the work is cleaning at the playfield level and getting the parts back on.
plastics
All posts tagged plastics
Progress on Harley has been traveling along really smoothly over the last couple of weeks to the point where I’m closing in on the final playfield assemblies to service. The first area to look at in this update is the pop bumpers, which will also include the scoop which sits just in front of them. There should be a plastic Harley sign that sits vertically on top of the scoop that has been broken off some time in the past. The pop bumpers are filthy and overdue for a full rebuild.
I had planned to begin this update with a really bad pun, but I’ll save you the anguish and get straight in to the good content! This update will be focusing on the assemblies in the lower section of playfield, along with cleaning up the drop target areas. I’ll also the look at the upper orbit shot as some screws that attach the metal rail to the playfield live under plastics in the mid section – so easier to do that all now in one go. The game has been played a lot over the years, with broken plastics across most areas of the playfield. The sling shot and return lane plastics are cracked or missing a few pieces. The bikes are still in one piece though, which is good news.
There was a time where I would have weeks (often months) between pinball projects. Not any more though. As one machine goes out the door, the next one rolls right on in. This time it’s back-to-back SEGA’s with a Harley Davidson replacing the Apollo 13. The last SEGA game before Stern took over. It was released in 1999 and there ended up being 3 editions released. The first from SEGA, which Stern then continued once it took over. That was followed by 2 additional editions a few years later by Stern. The game powers up, but has a few issues to look at. It needs a really good clean, but that’s typical of most games that come my way. The main issue I’m concerned about is (seemingly) random resets, which I will get to shortly. It has some mechanical issues, but those won’t be a problem to sort out. Let’s get started!
Time to wrap up the work on Apollo 13 and get it back into one piece for testing. First item on my to do list in this update is the rocket assembly, as it’s the last outstanding part of the playfield to get a clean. Then I can go through the process of getting everything back together (which is mostly the rails) and test the game. The end is in sight, which is exciting as I’m keen to play (…test) it. Time to get started! The rocket ship is the shot responsible for working towards the 13 ball multi ball mode. There is a ramp you shoot the ball up and a small assembly at the top which traps the ball, updates the countdown and then returns the ball back to the player. It is connected to a motor below the playfield, which performs a lift off and drops the ball into the large red ramp below the playfield.
