I’ve been busy working away on Baywatch over the last week and a half, making some really good progress along the way with it’s overhaul. Enough progress that I’ve split the content up into three updates so you’re not bombarded with it all at once. I just haven’t had time to do all the write ups yet. But that’s OK. The priority is getting the machine done. This update will focus on the sling shots, lower flippers and cleaning of the lower playfield area. The game is in real need of a clean – which is why it’s with me. The dirty playfield stands out and you can actually spot a small circular area at the base of the right sling shot mylar patch where I have wiped away the dirt (I was interested to see how easy it came up). A nice yellow can be seen – so I think this is going to clean up great!
service
All posts tagged service
After completing the remaining work on the Williams Whirlwind recently and the owner taking it home, it was time to move onto the next machine for repair & service. This time I’m looking at a Baywatch machine. Released by SEGA in early 1995 and able to be played by 6 players, it’s got a fairly decent playfield layout and is a lot of fun to play. The game play caught me by surprise as I’m not a huge fan of the theme (I’m sure my teenage self would have been..), but I find myself saying ‘just one more go’ when playing it. That’s a good sign for any game. The machine has been in the owners collection for awhile, crying out for a full service. As you’ve seen in my other threads, I get in and rebuild everything. It’s not a restoration, nor is it just a quick wipe down and fresh rubbers. Each assembly will be stripped, cleaned and worn parts replaced. The playfield will be stripped and everything properly cleaned too. Any game play issues will be sorted out and I’ll also spend some time doing presentation improvements (mostly things the owner has pointed out he wants addressed). Anyway, time to get started.
I had planned for this to be the final update on the Whirlwind repair & service, but before I give my focus to testing the game, there were two more presentation things to look at first. One of the final items to address on Whirlwind is the coin door. I had mentioned in previous updates I was going to look at it, but kept putting it off. No longer though. When dropping the machine off, the owner asked me to give the coin door a face lift. He wanted the rivets removed and the holes filled from the coin entry housing. No problem, can do. I wanted to go a little bit further though and replace the pricing plates with something nicer and also replace the two missing bolts from the coin door.
It’s update time again! Returning with part six of the repair and service I’m performing on a Williams Whirlwind machine. The updates have been fairly regular, which is great as it means progress has been pretty smooth. I’ve had a few hold ups while waiting for parts, but that’s about all. In my last update I finished off servicing the remaining assemblies on the machine. In this update, I’ll focus on getting the remaining bits back onto the playfield to get the game into a playable state! I’m really looking forward to seeing how it performs once the final pieces are cleaned and the playfield is back together. I suspect I will make a few minor switch tweaks around the sling shots and pop bumpers to get them in a sweet spot sensitivity wise – time will tell. To begin this update though, the replacement plastic pieces I ordered from Pinball Center arrived. They have a clear protective layer on top, which is why they look a little dull.
Having a set of pop bumpers on the playfield is almost mandatory for me when looking at pinball machines to play. The designers of Whirlwind must really have loved pop bumpers. Why have just one set on the playfield when you can have two? The only down side to pop bumpers is disassembling them as it cam be fiddly, especially those lamp sockets. The end result though after working on them really improves their performance, along with the presentation of a machine. It also makes them sound great too. The set I did in my previous update came up really nice and now it’s time to rebuild the second set. This update will be covering the final assemblies in the machine I need to look at, all of which are located at the top of the playfield. I’ll be starting first with the pop bumpers though.
