I’ve managed to build up a backlog of crap boxes to get through. I’ve been focusing on various projects and the spare parts boxes are a low priority. That means they have been sitting around collecting dust. I’ve stopped buying them now as I’ve got more spare parts than I know what to do with. The boxes have come in handy on recent projects, so purchasing them has been worth it. But with my shelves full, there is no need add to it. This post will cover crap box #4 which will be followed by #5 and #6 when I get to them. At a grand total of $21 for the content in this post, it makes the box the most expensive crap box to date, but there was one part here I really wanted. This box looks to have a nice mix of things in it too, so time to dig in 🙂
Stern
All posts tagged Stern
It’s time to once again dive into a pile of trash pinball parts and see what sort of gems I can uncover. This lot of pinball spare parts (or crap box as it’s also termed) cost under $16AU. There wasn’t anything in the original photos that caught my eye, I just wanted more spare parts available at hand for my projects. So, let’s have a look.
The final part covering my 12 month service of my Nugent. In some respects, it’s getting a much better playfield clean than when I rebuilt it this time last year. Although I replaced many old and worn parts, I didn’t give enough attention to the surface of the playfield. It was wiped down but I didn’t have the knowledge or confidence at the time to do more. The apron area has been taken care of, as has the lower playfield area. Now on to the upper half. First step was to remove everything. This includes the rebound rubber and gates. There is quite a bit of crap built up already.
The 12 months service of my Nugent machine continues. First up, I’ll expand on the area of the playfield which is largely responsible for spreading crap around the machine. At the top of the playfield there is a large wear patch that extends for about 10cm between the bonus saucer and the multiplier drop targets. This area seems to be a common wear zone as I’ve seen other Nugent playfields with damage in this area (although the others have not been as bad as this).
It’s now been 12 months since I came into possession of my first pinball machine. The Nugent has received a lot of play time over the year. I rebuilt the machine back in January / February this year and at the time was learning a lot about how pinball machines worked in general and the ways to clean & service them. Since then I’ve gone onto restore a Fireball Classic and also well underway with a Pinbot machine. I’ve learnt a lot since working on this machine and I decided that I’d revisit my Nugent for a 12 month service. I don’t plan to rebuild the machine like I did last time. It’s running really well, but needs a bit of a surface level clean. There are a few small issues I’d like to sort out (very minor) and I’d also like to apply some of the skills I’ve learnt since working on it to improve it further. The first thing to look at will be the plastics. A number of the pieces are warped.
