All posts tagged instruction

What better way to spend a rainy Sunday than to do some work on a loved pinball machine 🙂

Despite being slowed down a little as I build up funds for the next bulk parts order, there is still plenty of things to do meanwhile. They’re not always exciting, but it’s always forward motion to the end goal – getting this machine 100% and looking great. Today I wanted to look at the shooter.

Pinbot Shooter Assembly start
Continue Reading

Time for another installment on the progress so far.

This time, I’ll be focusing on the lower play field. I’m working my way up the play field – from the apron (which I covered in previous posts, all the way up tp tje top). This allows me to focus on specific areas and assemblies and then test them once they have been serviced. It also helps stop feeling overwhelmed with everything still to do.

The lower play field is quite dirty. Mylar covers some sections, while others either have chunks taken out of it (or it was removed by a previous owner). When it was removed you can see some damage that was done to multiplier and bonus inserts 🙁

I needed to service the slingshots, so figured that while I was doing that, I could also remove the remaining mylar and give the play field a much needed clean. Before I’m done with the machine I plan to give the play field a solid wax too. Doing the play field in stages will mean more work in the future as I’ll have to remove everything to clean and wax it, but I’ll live with that.

Fireball lower playfield
Continue Reading