There is rarely a dull moment in owning pinball machines as there’s always something that needs fixing or adjusting. A small fault was recently noticed in my Pinbot machine, where the left out lane switch would not register when the ball rolled over it. It was a quick and easy fix, but wanted to cover it for future readers anyway. First up, I put the game into test mode and activated the switch with my finger – as expected, the switch did not register. I then manually tested other switches around the playfield. Interestingly, the left in lane switch also did not register. Other switches were fine though. So two were switches (right beside each other) were misbehaving.
Continue Reading
fix
All posts tagged fix
First up for this update is the lock down bar. The condition of the bar itself is OK. It’s a little worn and has a few scratches, but is solid and doesn’t need replacing. The issue it does has however is it’s loose on the left side and does not lock down properly. I can lift the left side up with my hand.
