Free time & empty space. Who needs it? Well, I do.. but I enjoy working on pinball machines too, so those things have to wait. I didn’t get to enjoy 5 minutes of free space this time before the next game arrived for me to work on. In fact, I had a small shuffle around to create some extra space for this additional machine to work on. The freshly cleared area was instantly filled with a beautiful Apollo 13 from SEGA. I say beautiful because the condition is actually really good, with only a few small spots that need addressing. It’s Australian delivered and spent most of it’s life in a home. The game was released towards the end of 1995 and has so many balls (13) it needs two troughs to store them all. You’re up for a slab of beer every time you need to replace the set. That’s something to think about 😉 The game arrives with one known issue (sound not working), which will be my first item to address before I begin working my way through the game like I normally do. Although the game is reasonably clean on top, it looks like it hasn’t been given a good service in a long time (if ever) as there is a nice build up of black coil dust across all the assemblies below the playfield. I’ll be going through cleaning each one and replacing parts where necessary.
The first issue I wanted to look at was the lack of sound. Although I could play a game on the machine, I got no sound at all in most cases. When I could hear sound it was very very quiet or distorted.
I went into maintenance mode using the switch inside the coin door and to the sound test mode. I couldn’t hear anything.
There is a volume control inside the coin door which I adjusted. Again no sound.
Next up I wanted to check the plugs and sound board in the head box.