arcade machine

All posts tagged arcade machine

Perspex hunting

Posted by Andrew Burch on April 3, 2011
Posted in: Galaga Arcade Cabinet. Tagged: , , , . Leave a Comment

Recently I was looking into the use of perspex for some elements of the cab. I was considering perspex for the following:
– Marquee (2 pieces)
– Screen protection
– Control panel overlay
– Internal box for electrical wiring
– Cover for power supply

For the Marquee, screen and control panel overlay, I was quoted close to $300 by AB Plastics in Hallam. I didn’t end up bothering with quotes for the internal box and protector as I could see the final pricing moving past the $450 mark. This was for 4.5mm thick perspex, cut to some shapes, with one piece requiring a bend (the control panel). What got me the most was $170+ GST for the marquee panels. They are just there to hold the artwork in place.

(One of the things to keep in mind with perspex is it can get ‘waves’ along the edges if you screw it into place. The best method for holding perspex in place is with pressure. This can be eased somewhat by increasing the thickness of the perspex.)

Anyway, with the pricing in mind, I decided to look at some alternatives. Bunnings have various sized PVC sheets priced between $35 and $60. There are 3mm thick, so have much more bend in them (which is bad). For the control panel, I found I could get a proper Midway one that is used in Galaga cabs for around $45 (including shipping) from the US. So I decided to grab one of those and possibly ditch the perspex overlay idea.

After looking around for some other options, something wasn’t sitting right with me about the AB Plastics quote. Going over the break down again, it cost just $69 for the screen and control panel sheets, but $170 for the two marquee sheets. That doesn’t add up since there is less material in the two marquee sheets than the rest. Then it dawned on me – the figures he wrote down were incorrect. There was an extra zero added to the height of the marquee!! No wonder! So anyway, I will be heading back to get a quoted again on the marquee. I am still considering a perspex overlay for the control panel as I think it will offer great protection for the artwork. Hopefully the metal control panel will arrive before next Wednesday, so I can take it over to show exact measurements.

Another option to consider is glass, although this would only be for the screen sheet. PVC and Perspex is cheaper and will do the job just as well. The main consideration is thickness, and having seen both 4.5mm and 3mm, I think 4.5mm wins out.

Cab Construction – Day 1

Posted by Andrew Burch on April 2, 2011
Posted in: Galaga Arcade Cabinet. Tagged: , , , , , , . Leave a Comment

After two and a half months of planning and waiting, I have finally been able to start building the arcade cabinet (with help from my father in law). Using the Galaga cab plans from Jakobud, we started by marking out the desired side panel shape on one of the MDF sheets (Note: We purchased 3 1200 x 2400 x 18mm MDF sheets). Once this was cut out, the edges were sanded flatten out and improve smoothness of the corners and curves. We then used this as a stencil on the second MDF sheet to cut out the second side panel. Again edges were sanded. The results of this can be seen in the first image below.

Side Panels
Continue Reading

The second month in review

Posted by Andrew Burch on March 13, 2011
Posted in: Galaga Arcade Cabinet. Tagged: , , , . Leave a Comment

Yet another month has past on my journey to build my own arcade cabinet. The second month has seemed somewhat slower in progress, although I did get a few important things done. The biggest of which was the plans for the internal wiring. I also took some time to grab images of Galaga cab projects other people had done, and got them printed at photos to use as reference material as I’m building. A wise $5 investment I think. I purchased a number of wiring bits also to round the month off – not quite as exciting as researching and buying coin mechs, game boards or controls, but still important.

I think month 3 will see the most physical progress for the cab, as I expect the shell to be built and painted. The power wiring will be done and most internal components installed. With any luck, all that will remain at the end of the month will be some artwork and touch ups.

T Molding

Posted by Andrew Burch on March 13, 2011
Posted in: Galaga Arcade Cabinet. Tagged: , , , . Leave a Comment

My search for T Molding was fairly simple. There are a number of places here in Australia that sell it. Most online arcade shops have some available – it all depends on the thickness, colour and texture you are after.

My first purchase was from GameDude, which had the Galaxian Green I was wanting for my cab. This was priced at $12.50 per 10 feet. I thought this was ok. But I have since discovered T-Molding.com which has an awesome selection, and is even cheaper (despite being located in the states). For the same Galaxian green, I was able to purchase 20 feet for $10US (roughly $11AU). When postage was added, I was up for $20.78AU for the 20 feet (compared with close to $30 from GameDude).

T-Molding.com is well worth checking out when you are looking for t-molding for your arcade cabinet. The only real drawbacks I found was you are forced to purchase in increments of 20 feet and maybe have an extra few days to wait.

Jaycar Catalogue

Posted by Andrew Burch on March 8, 2011
Posted in: Galaga Arcade Cabinet. Tagged: , , , . Leave a Comment

Yep – I’m putting up a post dedicated to a catalgoue. The Jaycar catalogue to be exact. While looking for parts and tools to help build the cab, I was constantly looking over the Jaycar site which has a lot of parts to help wire it up. After much searching on the site (and a few small orders), I decided to purchase the catalogue (cost $3.95AU) and it was a very wise decision. I found a number of things I couldn’t find on the site, plus some extra’s I had not considered. It made my final order much easier, and also helped clear up some terminology issues (which helped with my part / product searches).

If you are looking at getting some internal parts for your cab, I’d recommend getting their catalogue.

Jaycar Catalogue